SINOCMP 101-1040-009 Hydraulic Motor Replacement for Eaton Char-Lynn H Series, 22.6 cu in/rev Displacement, 152 RPM 1250 PSI High Torque Low Speed Gerotor Hydraulic Motor for Construction Agriculture

Restore Heavy-Duty LSHT Performance With This 101-1040-009 H Series Hydraulic MotorSlow agricultural augers, weak harvester performance, and unexpected breakdowns often point to a worn hydraulic motor. This replacement hydraulic motor 101-1040-009 brings for Eaton Char-Lynn H Series equipment back to original performance without dealer pricing or long lead times. Designed as a direct replacement for 101-1040-009 models, this Gerotor spool valve motor delivers the 3604 lb-in torque and 152 RPM speed your heavy-duty LSHT (low-speed high-torque) applications demand.Complete SpecificationsModel Number: 101-1040-009 / 101-1040Model Code: MH0226AA01AA0000000000000AA00JSeries: H SeriesType: Spool Valve Gerotor Hydraulic MotorDisplacement: 22.6 cu in/rev (370 cc/rev)Max Continuous Pressure: 1250 PSI (86 bar)Max Continuous Flow: 15 GPM (57 L/min)Max Continuous Speed: 152 RPMMax Continuous Torque: 3604 lb-in (407 Nm)Mounting Type: 2-Bolt SAE-A Standard FlangePilot Diameter: 3.248 inch (82.50 mm)Pilot Depth: 0.120 inch (3.05 mm)Bolt Circle: 4.187 inch (106.35 mm)Mounting Hole Size: 0.535 inch (13.59 mm)Shaft Type: 1 inch straight keyed, Woodruff key, 1/4-20 UNC-2B threaded endKeyway Size: 0.25 inch (6.35 mm)Shaft Length: 1.75 inch (44.45 mm)Ports: 7/8-14 UNF-2B SAE O-ring side portsCase Drain: NoneRotation: Bidirectional (instant reversal)Housing: Cast iron, primer low gloss black paintDesign Code: J (Nine)Min Oil Viscosity: 100 SUS at operating tempMax Operating Temp: 180°F (82°C)Min Operating Temp: -30°F (-34°C)Overall Length: 6.95 inch (176.5 mm)Overall Height: 5.17 inch (131.3 mm)Mounting Plate Width: 5.17 inchWeight: 22.0 lbs (10.0 kg)Country of Origin: United StatesCompatibility InformationThis 101-1040-009 hydraulic motor serves as a replacement for Eaton Char-Lynn H Series applications. It is compatible with the following configurations:101-1040-009 (primary model number, Design Code J)101-1040 (base model)101-1040-005, 101-1040-007, 101-1040-008 (earlier revisions)Replaces 101-2474-006 (alternate model)2-Bolt SAE-A flange with 3.25" pilot, 1" keyed shaft specification22.6 cu in displacement, 15 GPM max flow specificationReplacement Information:Replacement Buna Seal Kit: 60540-000Replacement Viton Seal Kit: 60544-000Repair Manual: For Eaton Char-Lynn H Series Service Manual

• [🔧] Direct Swap – 22.6 cu/in Displacement: This hydraulic motor 101-1040-009 replaces for Eaton Char-Lynn H Series models with 22.6 cu in/rev (370 cc/rev) displacement . The 2-bolt SAE-A flange mount with 3.248 inch pilot diameter and 4.187 inch bolt circle lets this 101-1040-009 hydraulic motor bolt directly onto agricultural augers, harvesters, and industrial sweepers without modifications.
• [⚙️] High Torque – 3604 lb-in at 152 RPM: H series hydraulic motor delivers 3604 lb-in continuous torque at 152 RPM, with max pressure 1250 PSI and max flow 15 GPM . The Gerotor spool valve design with hydrodynamic journal bearings on this 101-1040-009 replacement hydraulic motor provides instant shaft reversal by changing flow direction .
• [🛢️] SAE O-Ring Ports – 7/8-14 UNF Side Ports: For Eaton Char-Lynn style hydraulic motor features 7/8-14 UNF-2B SAE O-ring side ports for reliable leak-free connections . The O-ring design on this 101-1040-009 hydraulic motor creates seals without thread sealant, saving installation time. No case drain required.
• [🏗️] Keyed Shaft – 1 Inch with 1/4 Keyway: This 101-1040-009 replacement hydraulic motor comes with 1 inch straight keyed shaft, 1/4 inch Woodruff keyway, and 1/4-20 UNC-2B threaded end hole . Cast iron housing with primer low gloss black finish withstands harsh environments . Max operating temperature 180°F, minimum -30°F . Weight 22 lbs.
• [📦] Ready-to-Install – Complete Assembly: Box contains one hydraulic motor 101-1040-009 (H Series specification, primer low gloss black finish, Design Code J) . Important: Verify 3.25 inch pilot diameter, 2-bolt pattern (4.187 inch bolt circle), and 1 inch keyed shaft before ordering. Flush hydraulic lines prior to installation. Min oil viscosity 100 SUS . Replacement seal kit 60540-000 (Buna-N).